Basic Info
Model No.: 35BYJ46 12V
Product Description
35BYJ46 12V High Torque Stepper Motor, Micro Stepper Motor, Gear Reducer Stepper Motor is a type of Micro Stepper Motor and also belongs to Stepper Motor.
Microstepping is a method of controlling stepper motors, typically used to achieve higher resolution or smoother motion at low speeds.
Micro Stepper Motor divides each full step into smaller steps to help smooth out the motor’s rotation, especially at slow speeds.
Microstepping is achieved by using pulse-width modulated (PWM) voltage to control current to the motor windings. The driver sends two voltage sine waves, 90 degrees out of phase, to the motor windings. While current increases in one winding, it decreases in the other winding. This gradual transfer of current results in smoother motion and more consistent torque production than full- or half-step control.
Driving Voltage |
12±10% V |
Phase |
4 Phase |
Lead Wire |
5 |
Excitation |
1-2 |
Reduction |
1/42.5 |
Step Angle |
7.5° |
Resistance |
15±10% Ω |
Pull In Frequency |
500 Hz |
Pull Out Frequency |
700 Hz |
Pull In Torque |
260 mN.m |
Detent Torque |
260 mN.m |
Insulation Resistance |
50 MΩ |
Dielectric Strength |
600 VAC/1mA/1s |
Friction Torque |
2.5-3.0 Kgf.cm |
Insulation Grade |
B |
Temperature Rise |
60 K |
Weight |
69 g |
Noise |
40 dBmax |
Diameter: 35 mm
Step Angle: 7.5°
Voltage: 12V, customized.
Phase: 4
Excitation: 1-2
All parameter can be customized according to your actural demand, for detailed information please contact me or leave a message.
Drawing of 35BYJ46 12V High Torque Stepper Motor, Micro Stepper Motor, Gear Reducer Stepper Motor
Our Company Maintex&FM